With the development trend of the media mining manufacturing industry in China, many people working in the media mining manufacturing industry often encounter problems such as excessive coalbed methane standards when working in wells or at work. Therefore, people often use compressed air escape equipment for treatment or protection. Compressed air escape equipment has excellent pressure relief, total flow adjustment, and also has very good drainage and anti pollution functions. It is not only simple and lightweight in structure, but also very convenient and simple in application, ensuring everyone's personal safety. So, what is the key to the actual use of compressed air escape equipment?
1. When using compressed air escape equipment, everyone should first connect it to the compressed air pipeline, and some gate valves should also be added to the pipeline. It is also necessary to prepare a relatively soft packaging bag in advance to facilitate putting it on top of your head.
2. When placing the compressed air escape equipment, it should be placed in a protected ketone room. When there is a malignant event such as the production of coalbed methane exceeding the standard or the explosion of coalbed methane coal dust, everyone can put packaging bags on their own heads and enter the ketone room for protection. Then, open the gate valve to carry out the escape, and be able to inhale fresh gas waiting for everyone's rescue.
The key to using compressed air escape equipment is the use of this type of escape equipment in wells. It not only provides a large amount of fresh gas when coalbed methane exceeds the standard, but also allows everyone to avoid a very safe site, thereby ensuring everyone's personal safety. The compressed air escape equipment is lightweight, convenient to use, and has good functions such as pressure relief, total flow adjustment, drainage, and pollution prevention. It is widely used in wells, so that everyone can have a good life guarantee when working in wells. So, what are the key regulations for the installation of compressed air escape equipment?
1. When installing a self rescue device, a tee with a gate valve should be connected to the main ventilation duct at the interface of each coal roadway, so as to connect to the ventilation duct of each coal roadway. Additionally, one set of self rescue devices should be installed every 60 meters at the interface between the coal roadway and the semi coal rock roadway
2. When installing self rescue devices in coal tunnels, it is also necessary to use adhesive tape to connect the short branch pipes of a set of compressed air escape equipment. Other raw materials or objects should not be used as substitutes to prevent ventilation and other problems. It has excellent sealing characteristics and generates a lot of safety and assurance for everyone during application.