1.1. Adopting a new type of fully digital control technology, controlled by a programmable logic controller (PLC), touch screen touch and button operation, it can achieve automatic feeding, automatic cutting, automatic unloading and counting, and display preset, cut quantity, and historical cut quantity on the screen.
1.2. Transmission of signals through switches, convenient sizing, and small cutting tolerances.
1.3. It has an automatic unloading function, which can automatically push and stack the cut anchor lines.
1.4. Designed a feeding guide port for easier and more convenient threading.
1.5. Fast feeding speed, uninterrupted and continuous feeding. It has multiple working modes including manual, automatic, and quantitative.
1.6. Equipped with a large cable reel to facilitate the smooth insertion of steel strands, equipped with a ring-shaped top plate to prevent anchor wire damage, which is conducive to safe production and improves production efficiency.
1.7. Without the need for training, it can be operated by a single person, greatly improving work efficiency, reducing the labor intensity of workers, improving the working environment, increasing the safety factor, and reducing production costs.
Production line composition
The function of a cable reel is to bear the weight of the anchor cable reel and rotate the cable reel under the traction of the driving device. The cable reel is designed with a top plate to prevent the anchor line from bouncing and injuring people.
The main function of the driving device is to drive the feeding, reversing, and stopping of the anchor line.
The main function of the cutting host is to continuously cut anchor lines, and it also has functions such as anchor line clamping, guidance, cutting detection, chip replacement alarm, and out of position alarm. All operations are automatically completed in conjunction with the electronic control system.
Control cabinet function: The motor feeding and reverse rotation are controlled by a programmable controller (PLC); Start/stop the cutting machine; After cutting, it will automatically return to its original position and push the cut anchor line down. The system adopts two methods of touch screen control and button control, which increases the reliability of the system. Three cutting methods, manual, continuous, and quantitative, can be set for the cutting machine.
The function of the unloading rack is to guide the anchor line to the specified position, reach the cutting length, and automatically pop out and stack the anchor line after the cutting is completed. The length of the unloading rack comes standard with 3 sets, each set of 3.5 meters, and can also be customized according to user needs