Device Function Description
Used for fixed length cutting of steel bar raw materials. Based on the length of the anchor rod product, achieve the original thread steel
The material is cut to a certain length to meet the roundness, surface smoothness, and diameter reduction requirements of the anchor rod processing area.
Main technical parameters:
1. Machinable steel bar material: MG335~MG600 threaded steel;
2. Shear range: Ø 16-27mm;
3. Shear speed: ≥ 12 times per minute;
4. Main motor power: ≥ 11KW
5. Hydraulic system pressure: 0-31.5Mpa
6. Processing profile: 90 ° right angle
7. Blade cutting life: ≥ 50000 times.
8. Voltage: 380v 50HZ
Equipment technical parameters
1. Cut the threaded steel without bending or cracking.
2. The equipment has functions such as automatic cutting, resetting, and automatic lubrication.
3. Install protective covers on the mechanical transmission parts, and the shear blades should be easy to replace.
4. The device has two operating modes: manual and foot pedal, which can be adjusted according to actual usage needs
Time adjustment.
5. The hydraulic system operates stably and reliably, and the working pressure can be adjusted according to actual usage needs
6. The electrical system has overcurrent protection function.
7. The feeding frame can bear a weight of 5 tons and can meet the requirements of raw materials for threaded steel with a length of 8.8-12m
The placement of materials, the feeding method for a single threaded steel is a roller type.